This page was exported from Offer Free Microsoft and Cisco Exam Dumps [ http://www.hitachidumps.com ] Export date:Sun Feb 1 9:25:38 2026 / +0000 GMT ___________________________________________________ Title: [2025-December-New]Braindump2go 350-401 Exam Guide Free[Q1028-Q1099] --------------------------------------------------- 2025/December Latest Braindump2go 350-401 Exam Dumps with PDF and VCE Free Updated Today! Following are some new Braindump2go 350-401 Real Exam Questions!QUESTION 1028Which DNS record type is required to allow APs to discover a WLC by using DNS on IPv4?A. NSB. AC. SOAD. MXAnswer: BQUESTION 1029What is modularity in network design?A. ability to bundle several functions into a single layer of the networkB. ability to create self-contained, repeatable sections of the networkC. ability to self-heal the network to prevent service outagesD. ability to scale and accommodate future needs of the networkAnswer: DExplanation:You can design a campus network in a logical manner, using a modular approach. In this approach, each layer of the hierarchical network model can be broken into basic functional units. These units, or modules, then can be sized appropriately and connected, while allowing for future scalability and expansion.QUESTION 1030Refer to the exhibit. An engineer configured TACACS+ to authenticate remote users, but the configuration is not working as expected. Which configuration must be applied to enable access? A. R1 (config)# ip tacacs source-interface Gig 0/0B. R1 (config)# tacacs server prodR1(config-server-tacacs)# port 1020C. R1 (config)# aaa authorization exec default group tacacs+ localD. R1 (config)# tacacs server prodR1(config-server-tacacs)# key cisco123Answer: DQUESTION 1031A customer has two Cisco WLCs that manage separate APs throughout a building. Each WLC advertises the same SSID but terminates on different interfaces. Users report that they drop their connections and change IP addresses when roaming. Which action resolves this issue?A. Configure high availability.B. Enable fast roaming.C. Configure mobility groups.D. Enable client load balancingAnswer: CExplanation:Mobility or roaming services enables a WLAN client to retain its association !!!seamlessly!!! while moving from one Access Point to another. Cisco WLAN controllers (WLC) can be organized into wireless mobility groups to support intercontroller roaming.QUESTION 1032What is one difference between the RIB and the FIB?A. The RIB keeps all routing information received from peers, and the FIB keeps the minimum information necessary to make a forwarding decision.B. The RIB works at the data plane, and the FIB works at the control plane.C. The FIB contains routing prefixes, and the RIB contains the Layer 2 and Layer 3 information necessary to make a forwarding decision.D. The RIB is known as the CEF table, and the FIB is known as the routing table.Answer: AQUESTION 1033What is a characteristic of an AP operating in FlexConnect mode?A. All traffic traverses the WLC to ensure policy enforcement on client traffic.B. Forwarding for locally switched traffic continues when the AP loses connectivity to the WLC.C. APs connect in a mesh topology and elect a root APD. FlexConnect enables an AP to connect to multiple WLCs.Answer: BQUESTION 1034What is the benefit of using TCAM for IP forwarding decisions versus using the CAM table?A. TCAM finds results based on binary, and CAM uses the longest match to find resultsB. TCAM processes lookups in a hardware CPU. and CAM relies on binary masks to find results.C. TCAM finds results based on masks, and CAM finds results basing on exact match.D. TCAM uses low cost hardware memory to store addresses, and CAM uses expensive hardware memory.Answer: BExplanation:The problem with CAM is that it can only do exact matches on ones and zeros (binary CAMs).By implementing router prefix lookup in TCAM, we are moving process of Forwarding Information Base lookup from software to hardware.QUESTION 1035Refer to the exhibit. Two indirectly connected routers fail to form an OSPF neighborship. What is the cause of the issue? A. failing hello packets between the two routersB. DR/BDR selection disputeC. MTU mismatchD. OSPF network type mismatchAnswer: CQUESTION 1036Which feature is provided by Cisco Mobility Services Engine in a Cisco Wireless Unified Network architecture?A. It adds client packet capturing.B. It enables NetFlow data collection.C. It adds client tracking and location API.D. It identifies authentication problems.Answer: CExplanation:This solution allows a customer to track any Wi-Fi device, including clients, active RFID tags, and rogue clients and access points (APs).QUESTION 1037Which unit of measure is used to measure wireless RF SNR?A. dBiB. dBC. dBmD. mWAnswer: BExplanation:The signal-to-noise ratio (SNR) is typically expressed in decibels (dB). This logarithmic scale is used because it allows for easier comparison of large or small SNR values. While other units might be used in specific contexts, decibels are the most common and widely used unit for expressing SNR.https://documentation.meraki.com/MR/Wi-Fi_Basics_and_Best_Practices/Signal-to-Noise_Ratio_(SNR)_and_Wireless_Signal_StrengthQUESTION 1038In a campus network design, what are two benefits of using BFD for failure detection? (Choose two.)A. BFD speeds up routing convergence time.B. BFD is an efficient way to reduce memory and CPU usage.C. BFD provides fault tolerance by enabling multiple routers to appear as a single virtual router.D. BFD provides path failure detection in less than a second.E. BFD enables network peers to continue forwarding packets in the event of a restart.Answer: ADQUESTION 1039Refer to the exhibit. A network engineer issues the debug command while troubleshooting a network issue. What does the output confirm? A. ACL 100 is tracking ICMP traffic from 10.1.1.1 destined for 1.1.1.1.B. ACL100 is tracking all traffic from 10.1.1.1 destined for 1.1.1.1.C. ACL100 is tracking ICMP traffic from Serial1/0 destined for Serial3/0.D. ACL100 is tracking ICMP traffic from 1.1.1.1 destined for 10.1.1.1.Answer: DQUESTION 1041Which version of NetFlow does Cisco Threat Defense utilize to obtain visibility into the network?A. NBAR2B. IPFIXC. 8D. flexibleAnswer: DQUESTION 1042Refer to the exhibit. What is printed to the console when this script is run? A. a key-value pair in tuple typeB. an errorC. a key-value pair in list typeD. a key-value pair in string typeAnswer: DQUESTION 1043What is a difference between Chef and other automation tools?A. Chef is an agentless tool that uses playbooks, and Ansible is an agent-based tool that uses cookbooks.B. Chef is an agentless tool that uses a primary/minion architecture, and SaltStack is an agent-based tool that uses a primary/secondary architectureC. Chef is an agent-based tool that uses cookbooks, and Ansible is an agentless tool that uses playbooks.D. Chef uses Domain Specific Language, and Puppet uses Ruby.Answer: CQUESTION 1044An engineer must configure a new WLAN that supports 802.11r and requires users to enter a passphrase. What must be configured to support this requirement?A. 802.1X and Fast TransitionB. FT PSK and Fast TransitionC. 802.1X and SUITEB-1XD. FT PSK and SUITEB-1XAnswer: BExplanation:Fast Transition (FT), often referred to as 802.11r, allows wireless clients to seamlessly switch between access points (APs) within the same WLAN without any noticeable interruption in connectivity. This significantly improves the user experience, especially for mobile users or applications sensitive to network disruptions.QUESTION 1045Refer to the exhibit. An engineer is troubleshooting an mDNS issue in an environment where Cisco ISE is used to dynamically assign mDNS roles to users. The engineer has confirmed that ISE is sending the correct values, but name resolution is not functioning as expected. Which WLC configuration change resolves the issue? A. Enable AAA Override.B. Enable Aironet IE.C. Set MFP client protection to Required.D. Change NAC state to ISE NAC.Answer: AQUESTION 1046What is one role of the VTEP in a VXLAN environment?A. to maintain VLAN configuration consistencyB. to forward packets to non-LISP sitesC. to provide EID-to-RLOC mappingD. to encapsulate the tunnelAnswer: DQUESTION 1047How is CAPWAP data traffic encapsulated when running an Over the Top WLAN in a Cisco SD-Access wireless environment?A. LISPB. VXLANC. GRED. IPsecAnswer: BQUESTION 1048Refer to the exhibit. What does the Python code accomplish? A. It configures interface e1/32 to be in an admin down stateB. It generates a status code of 403 because the type is incorrect.C. It configures interface e1/32 to be in an err-disable state.D. It returns data in JSON-RPC format.Answer: AQUESTION 1049Refer to the exhibit. Which action must be performed to allow RESTCONF access to the device? A. Enable the NETCONF service.B. Enable the SSH service.C. Enable the IOX service.D. Enable the HTTPS service.Answer: DExplanation:RESTCONF runs over HTTPS. The following commands must be enabled to support RESTCONF over port 443:ip http secure-serverQUESTION 1051Which technology is used as the basis for the Cisco SD-Access data plane?A. LISPB. 802.1QC. VXLAND. IPsecAnswer: CQUESTION 1052How is OAuth framework used in REST API?A. as a framework to hash the security information in the REST URLB. by providing the external application a token that authorizes access to the accountC. as a framework to hide the security information in the REST URLD. by providing the user credentials to the external applicationAnswer: BQUESTION 1053What is a characteristic of Cisco DNA southbound APIs?A. implements monitoring by using the SOAP protocolB. enables orchestration and automation of network devices based on intentC. utilizes REST APID. simplifies management of network devicesAnswer: BQUESTION 1054Where is the wireless LAN controller located in a mobility express deployment?A. The wireless LAN controller exists in a server that is dedicated for this purpose.B. The wireless LAN controller is embedded into the access point.C. The wireless LAN controller exists in the cloud.D. There is no wireless LAN controller in the network.Answer: BQUESTION 1055Refer to the exhibit. A network engineer must permit administrators to automatically authenticate if there is no response from either of the AAA servers. Which configuration achieves these results? A. aaa authentication enable default group radius localB. aaa authentication login default group radiusC. aaa authentication login default group tacacs+ lineD. aaa authentication login default group radius noneAnswer: DQUESTION 1056Which hypervisor requires a host OS to run and is not allowed to directly access the hosts hardware and resources?A. nativeB. bare metalC. type 1D. type 2Answer: DQUESTION 1057Refer to the exhibit. The NETCONF object is sent to a Cisco IOS XE switch. What is the purpose of the object? A. Discover the IP address of interface GigabitEthernet1B. Remove the IP address from interface GigabitEthernet1C. Set the description of interface GigabitEthernet1 to "1"D. View the configuration of all GigabitEthernet interfacesAnswer: AQUESTION 1058Which protocol does Cisco SD-WAN use to protect control plane communication?A. STUNB. OMPC. IPsecD. DTLSAnswer: DQUESTION 1059Which security option protects credentials from sniffer attacks in a basicAPI authentication?A. next-generation firewallB. TLS or SSL for communicationC. VPN connection between client and serverD. AAA services to authenticate the APIAnswer: BQUESTION 1060Which mechanism can be used to enforce network access authentication against an AAA server if the endpoint does not support the 802.1X supplicant functionality?A. WebAuthB. MACsecC. private VLANsD. port securityAnswer: AQUESTION 1061An engineer must configure router R1 to validate user logins via RADIUS and fall back to the local user database if the RADIUS server is not available. Which configuration must be applied?A. aaa authentication exec default radius localB. aaa authentication exec default radiusC. aaa authorization exec default radius localD. aaa authorization exec default radiusAnswer: CQUESTION 1062What does the Cisco WLC Layer 3 roaming feature allow clients to do?A. maintain their IP address when roaming to an AP or controller with a different client VLAN assignmentB. maintain their connection between APs even when the AP management VLANs are differentC. maintain their connection even if the client IP address changes when roamingD. roam seamlessly between controllers even when the controller management VLANs are differentAnswer: DExplanation:L3 roaming enables client to preserve its ip when roaming to an AP that is connected to another WLC.QUESTION 1064What is the function of Cisco DNA Center in a Cisco SD-Access deployment?A. It is responsible for the design, management, deployment, provisioning, and assurance of the fabric network devicesB. It is responsible for routing decisions inside the fabricC. It provides integration and automation for all nonfabric nodes and their fabric counterpartsD. It possesses information about all endpoints, nodes, and external networks related to the fabricAnswer: AQUESTION 1065How do the MAC address table and TCAM differ?A. TCAM is populated from the ARP file, and the MAC address table is populated from the switch configuration fileB. TCAM stores Layer 2 forwarding information, and the MAC address table stores QoS informationC. TCAM lookups can match only 1s and 0s, and MAC address lookups can match 1s, 0s and a third "care/don't care" stateD. TCAM is a type of memory and the MAC address table is a logical structureAnswer: DQUESTION 1066Which technology provides an overlay fabric to connect remote locations utilizing commodity data paths and improves network performance, boosts security, and reduces costs?A. InfiniBandB. VTEPC. SD-WAND. VXLANAnswer: CQUESTION 1067Which two actions are recommended as security best practices to protect REST API? (Choose two.)A. Enable dual authentication of the sessionB. Use a password hashC. Use SSL for encryptionD. Use TACACS+ authenticationE. Enable out-of-band authenticationAnswer: BCQUESTION 1068Refer to the exhibit. An engineer is configuring WebAuth on a Cisco Catalyst 9800 Series WLC. The engineer has purchased a third-party certificate using the FQDN of the WLC as the CN and intends to use it on the WebAuth splash page. What must be configured so that the clients do not receive a certificate error? A. Virtual IPv4 Hostname must match the CN of the certificateB. Virtual IPv4 Address must be set to a routable addressC. Web Auth Intercept HTTPs must be enabledD. Trustpoint must be set to the management certificate of the WLCAnswer: AQUESTION 1070Refer to the exhibit. What is the output of this code? A. 1st_item#######: 6452987918714462nd_item_that_must_display: jlugyydt##B. 1st_item#######: 64529879182nd_item_that_m: jlugyydt##C. 1st_item#######: 8791871446at_must_display: jlugyydtD. 645298791871446##jlugyydtAnswer: AQUESTION 1071Refer to the exhibit. An engineer is troubleshooting an issue with non-Wi-Fi interference on the 5-GHz band. The engineer has enabled Cisco CleanAir and set the appropriate traps, but the AP does not change the channel when it detects significant interference. Which action will resolve the issue? A. Enable the Avoid Persistent Non-WiFi interference optionB. Change the DCA Sensitivity option to HighC. Enable the Event Driven Radio Resource Management optionD. Disable the Avoid Foreign AP Interference optionAnswer: CExplanation:The reason the AP is not changing channels upon detecting significant interference is because Event Driven Radio Resource Management (EDRRM) is not enabled. EDRRM allows the AP to dynamically change channels based on interference detected in real-time. Without EDRRM enabled, the AP may still detect interference but will wait until the next Dynamic Channel Assignment (DCA) cycle to change channels, which could be up to 10 minutes, as per the interval set in the exhibit.Event Driven RRM (EDRRM) is crucial for immediate response to interference. By enabling EDRRM, the AP can dynamically react to changing conditions, improving performance and reducing interference impact.Dynamic Channel Assignment (DCA) operates on an interval-based system, and EDRRM provides the ability to act between DCA intervals.Enabling Event Driven RRM will allow the AP to change channels immediately when non-Wi-Fi interference is detected, thereby mitigating the interference effects.QUESTION 1072Refer to the exhibit. What is achieved by the XML code? A. It displays the access list sequence numbers from the output of the show ip access-list extended flp command on the terminal screenB. It displays the output of the show ip access-list extended flp command on the terminal screenC. It reads the access list sequence numbers from the output of the show ip access-list extended flp command into a dictionary listD. It reads the output of the show ip access-list extended flp command into a dictionary listAnswer: DQUESTION 1073An engineer measures the Wi-Fi coverage at a customer site The RSSI values are recorded as follows:- Location A: -72 dBm- Location B: -75 dBm- Location C -65 dBm- Location D -80 dBmWhich two statements does the engineer use to explain these values to the customer? (Choose two.)A. The signal strength at location C is too weak to support web surfingB. Location D has the strongest RF signal strengthC. The RF signal strength at location B is 50% weaker than location AD. The RF signal strength at location C is 10 times stronger than location BE. The signal strength at location B is 10 dB better than location CAnswer: CDQUESTION 1074Where are operations related to software images located in the Cisco DNA Center GUI?A. ServicesB. ProvisioningC. AssuranceD. DesignAnswer: DExplanation:In the Cisco DNA Center GUI, click the Menu icon () and choose Design > Image Repository.QUESTION 1075What is a difference between OSPF and EIGRP?A. OSPF uses a default hello timer of 5 seconds. EIGRP uses a default hello timer of 10 seconds.B. OSPF uses multicast addresses 224.0.0.5 and 224.0.0.6. EIGRP uses multicast address 224.0.0.10.C. OSPF uses an administrative distance of 115. EIGRP uses an administrative distance of 160.D. OSPF uses IP protocol number 88. EIGRP uses IP protocol number 89.Answer: BQUESTION 1076Which type of antenna is designed to provide a 360-degree radiation pattern?A. YagiB. patchC. directionalD. omnidirectionalAnswer: DQUESTION 1082Which two security mechanisms are used by Cisco Threat Defense to gain visibility into the most dangerous cyber threats? (Choose two.)A. virtual private networksB. file reputationC. VLAN segmentationD. Traffic TelemetryE. dynamic enforce policyAnswer: BDQUESTION 1083Which action is a LISP ITR responsible for?A. responding to map-request messagesB. forwarding user data trafficC. finding EID-to-RLOC mappingsD. accepting registration requests from ETRsAnswer: CExplanation:An ITR is responsible for finding EID-to-RLOC mappings for all traffic destined for LISP-capable sites. When the ITR receives a packet destined for an EID, it first looks for the EID in its mapping cache. If the ITR finds a match, it encapsulates the packet inside a LISP header with one of its RLOCs as the IP source address.https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_lisp/configuration/15-mt/irl-15-mt-book/irl-overview.pdfQUESTION 1084An engineer modifies the existing ISE guest portal URL to use a static FQDN. Users immediately report that they receive certificate errors when they are redirected to the new page. Which two additional configuration steps are needed to implement the change? (Choose two.)A. Add a new DNS record to resolve the FQDN to the PSN IP addressB. Create and sign a new CSR that contains the static FQDN entryC. Manually configure the hosts file on each user device.D. Disable HTTPS on the WLC under the Management menuE. Add the FQDN entry under the WLC virtual interfaceAnswer: ABQUESTION 1086What is contained in the VXLAN header?A. VXLAN network identifierB. source and destination RLOC IDC. endpoint IDD. original Layer 2 VLAN IDAnswer: AExplanation:VXLAN is typically used to extend L2 networks, but the original Layer 2 VLAN ID itself is not included in the VXLAN header.QUESTION 1087Refer to the exhibit. Clients are reporting an issue with the voice traffic from the branch site to the central site. What is the cause of this issue? A. There is a routing loop on the networkB. There is a high delay on the WAN linksC. Traffic is load-balancing over both links, causing packets to arrive out of orderD. The voice traffic is using the link with less available bandwidthAnswer: AQUESTION 1088Which virtualization component creates VMs and performs hardware abstraction that allows multiple VMs to run at the same time?A. containerB. DockerC. hypervisorD. rktAnswer: CQUESTION 1089Refer to the exhibit. An SSID is configured and both clients can reach their gateways on the Layer 3 switch, but they cannot communicate with each other. Which action resolves this issue? A. Set the WMM Policy to AllowedB. Set the P2P Blocking Action to DisabledC. Set the WMM Policy to RequiredD. Set the P2P Blocking Action to Forward-UpStreamAnswer: BQUESTION 1090What is a characteristic of VXLAN?A. It extends Layer 2 and Layer 3 overlay networks over a Layer 2 underlayB. It has a 12-byte packet headerC. It uses TCP for transportD. Its frame encapsulation is performed by MAC-in-UDPAnswer: DExplanation:VXLAN (Virtual Extensible LAN) uses MAC-in-UDP encapsulation, where Ethernet frames are encapsulated within UDP packets to enable Layer 2 networks to extend over a Layer 3 underlay. This encapsulation allows for scalable network virtualization, supporting up to 16 million VXLAN segments using a 24-bit VXLAN Network Identifier (VNI).QUESTION 1091Which network devices secure API platforms?A. content switchesB. web application firewallsC. next-generation intrusion detection systemsD. Layer 3 transit network devicesAnswer: BQUESTION 1092What does Call Admission Control require the client to send in order to reserve the bandwidth?A. SIP flow informationB. Wi-Fi multimediaC. VoIP media session awarenessD. traffic specificationAnswer: DQUESTION 1093Which capability does a distributed virtual switch have?A. use floating static routesB. provide configuration consistency across the hostsC. run dynamic routing protocolsD. use advanced IPsec encryption algorithmsAnswer: BQUESTION 1094Which two methods are used to assign security group tags to the user in a Cisco TrustSec. architecture? (Choose two.)A. web authenticationB. IEEE 802.1xC. DHCPD. modular QoSE. policy routingAnswer: ABQUESTION 1095Which resource must the hypervisor make available to the virtual machines?A. bandwidthB. IP addressC. processorD. secure accessAnswer: CQUESTION 1096Refer to the exhibit. An engineer must configure a Cisco WLC with WPA2 Enterprise mode and avoid global server lists. Which action is required? A. Enable EAP parametersB. Apply CISCO ISE default settingsC. Select a RADIUS authentication serverD. Disable the RADIUS server accounting interim updateAnswer: CQUESTION 1098Which two mechanisms are used with OAuth 2.0 for enhanced validation? (Choose two.)A. authorizationB. custom headersC. request managementD. authenticationE. accountingAnswer: ADQUESTION 1099Which characteristic applies to the endpoint security aspect of the Cisco Threat Defense architecture?A. detect and block ransomware in email attachmentsB. outbound URL analysis and data transfer controlsC. user context analysisD. blocking of fileless malware in real timeAnswer: CResources From:1.2025 Latest Braindump2go 350-401 Exam Dumps (PDF & VCE) Free Share:https://www.braindump2go.com/350-401.html2.2025 Latest Braindump2go 350-401 PDF and 350-401 VCE Dumps Free Share:https://drive.google.com/drive/folders/1EIsykNTrKvqjDVs9JMySv052qbrCpe8V?usp=sharing3.2025 Free Braindump2go 350-401 Exam Questions Download:https://www.braindump2go.com/free-online-pdf/350-401-VCE-Dumps(1028-1099).pdfFree Resources from Braindump2go,We Devoted to Helping You 100% Pass All Exams! --------------------------------------------------- Images: --------------------------------------------------- --------------------------------------------------- Post date: 2025-12-17 09:07:59 Post date GMT: 2025-12-17 09:07:59 Post modified date: 2025-12-17 09:07:59 Post modified date GMT: 2025-12-17 09:07:59 ____________________________________________________________________________________________ Export of Post and Page as text file has been powered by [ Universal Post Manager ] plugin from www.gconverters.com