This page was exported from Offer Free Microsoft and Cisco Exam Dumps [ http://www.hitachidumps.com ] Export date:Sun Feb 1 9:25:42 2026 / +0000 GMT ___________________________________________________ Title: [2025-December-New]Braindump2go 350-601 Practice Exam Free[Q436-Q501] --------------------------------------------------- 2025/December Latest Braindump2go 350-601 Exam Dumps with PDF and VCE Free Updated Today! Following are some new Braindump2go 350-601 Real Exam Questions!QUESTION 436Which two features are used to allow a nondisruptive upgrade for the ISSU process? (Choose two.)A. connectivity management processorB. nonstop forwardingC. graceful restartD. stateful switchoverE. advanced services licenseAnswer: BDQUESTION 437Refer to the exhibit. An engineer must configure a Fibre Channel device alias named TEST for a device attached to port fc1/9 of a Cisco Nexus Series Switch. Which command set completes the configuration? A. SITE-A-MDS-Fabric-A# configure terminalSITE-A-MDS-Fabric-A (config)# device-alias databaseSITE-A-MDS-Fabric-A (config-device-alias-db)# device-alias name TEST pwwn50:00:14:42:d0:0 c:f5:20SITE-A-MDS-Fabric-A (config-device-alias-db)# exitB. SITE-A-MDS-Fabric-A# configure terminalSITE-A-MDS-Fabric-A (config)# device-alias databaseSITE-A-MDS-Fabric-A (config-device-alias-db)# device-alias name TEST pwwn50:00:14:40:47:b0:0 c:f5SITE-A-MDS-Fabric-A (config-device-alias-db)# device-alias commitC. SITE-A-MDS-Fabric-A# configure terminalSITE-A-MDS-Fabric-A (config)# device-alias databaseSITE-A-MDS-Fabric-A (config-device-alias-db)# device-alias name TEST pwwn50:00:14:42:d0:0 c:f5:20SITE-A-MDS-Fabric-A (config-device-alias-db)# device-alias commitD. SITE-A-MDS-Fabric-A# device-alias databaseSITE-A-MDS-Fabric-A (config-device-alias-db)# device-alias name TEST pwwn50:00:14:40:47:b0:0 c:f5SITE-A-MDS-Fabric-A (config-device-alias-db)# device-alias commitAnswer: CExplanation:We need to zone the PWWN (port WWN) of fc1/9, not the NWWN (node WWN) of fc1/9.QUESTION 438A network engineer must configure a Fibre Channel interface on the Cisco MDS 9000 Series Switch. The configuration must meet these requirements:- The interface must be disabled when the bit errors threshold Is exceeded- Buffer-to-buffer credits must be set to the maximum value- The interface must have full bandwidth allocated for its port groupWhich command set configures a Fibre Channel interface that meets these requirements?A. interface fc1/1switchport bit-errorsswitchport fcrxbbcredit 220 mode Fxswitchport rate-mode dedicatedB. interface fc1/1switchport ignore bit-errorsswitchport fcrxbbcredit 255 mode Fxno switchport rate-modeC. interface fc1/1no switchport ignore bit-errorsswitchport fcrxbbcredit 255 mode Fxswitchport rate-mode dedicatedD. interface fc1/1no switchport bit-errorsswitchport fcrxbbcredit 220 mode Fxno switchport rate-modeAnswer: AQUESTION 439Refer to the exhibit. A network engineer is using tcpdump to capture a snapshot of OSPF-related traffic on a specific Cisco NX-OS switch port. For security reasons, the capture must be taken using an embedded container that is already deployed on the Cisco Nexus device. Which command completes the script? A. guestshellB. guestshell-bashC. run guestshellD. run bashAnswer: AQUESTION 440Which file service protocol allows the files to appear locally mapped to the client and provides view, store, and update capabilities on a remote Linux-based storage repository that also serves as a distributed file system standard for NAS?A. NFSB. FTPC. iSCSID. IFSAnswer: AExplanation:NFS is an Internet Standard, client/server protocol developed in 1984 by Sun Microsystems to support shared, originally stateless, (file) data access to LAN-attached network storage. As such, NFS enables a client to view, store, and update files on a remote computer as if they were locally stored.QUESTION 441Refer to the exhibit. Which command needs to be added to the line starting with the `file` keyword to have the generated running-config file with the name 'fusion-config_' and current date? A. str.('fusion-config_') + dateB. ('fusion-config_') + dateC. ('fusion-config_ + date')D. string(('fusion-config_') + dateAnswer: BExplanation:See below for an example:nxos9kv# pythonPython 2.7.11 (default, Feb 26 2018, 03:34:16)[GCC 4.6.3] on linux2Type "help", "copyright", "credits" or "license" for more information.>>> import time>>> import cli>>> date = time.strftime('%Y%m%d')>>> file = ("fusion-config_') + date>>> print(file)fusion-config_20210329>>> print('copy running-config ftp://10.183.249.182/FusionSW/' + file) copy running-config ftp://10.183.249.182/FusionSW/fusion-config_20210329QUESTION 442Which Cisco UCS Manager XML encoded backup type must be used to back up user names, roles, and service profiles?A. Full State ConfigurationB. Logical ConfigurationC. All ConfigurationD. System ConfigurationAnswer: CQUESTION 443Which two configuration settings are available in the Cisco UCS Firmware Auto Sync Server policy? (Choose two.)A. Immediate ActionB. User NotificationC. User AcknowledgeD. Delayed ActionE. No ActionAnswer: CEExplanation:Following are the values for the Firmware Auto Sync Server policy:User Acknowledge - Firmware on the server is not synchronized until the administrator acknowledgesthe upgrade in the Pending Activities dialog box.No Action - No firmware upgrade is initiated on the server.https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/gui/2-2/b_GUI_Firmware_Management_22/b_GUI_Firmware_Management_22_chapter_01111.pdfQUESTION 444A company plans to migrate some of its services to the cloud. The company does not want to manage or control the underlying cloud infrastructure. It also wants to maintain control over the deployment of its applications and configuration settings of the application-hosting environment.Which cloud service model meets these requirements?A. Infrastructure as a ServiceB. Function as a ServiceC. Platform as a ServiceD. Software as a ServiceAnswer: AQUESTION 445What is a benefit of Cisco HyperFlex All-Flash Stretched cluster deployment as compared to All-HDD Stretched cluster deployment?A. lower costB. lower number of IOPSC. higher costD. higher number of IOPSAnswer: DQUESTION 446Refer to the exhibit. A network engineer must configure an authentication solution for Cisco UCS with these conditions:- Two-factor authentication must be enabled for all UCS user authentication.- All AAA packets must be encrypted and use TCP port 49 to establish communication.Which set of actions needs these requirements? A. Create the LDAP provider.Change the LDAP group rule in an LDAP provider.B. Create the RADIUS group mapping.Change the RADIUS group rule in a RADIUS provider.C. Remove the LDAP provider.Create a TACACS+ provider in user management.D. Delete the LDAP group mapping.Create a RADIUS provider in user management.Answer: CQUESTION 447A customer asks an engineer to develop an orchestration solution to automate repetitive tasks. The customer operations team must integrate the tool with its existing automation framework. The customer asks for the tool to support these requirements:- The customer's security requirements mandate the use of SSH transport.- No extra software must be installed on the managed systems.- The support staff has limited knowledge of scripting languages, so the solution must be easy to read and use declarative language.Which solution meets these requirements?A. PowerShellB. AnsibleC. ChefD. PuppetAnswer: BQUESTION 450Refer to the exhibit. An engineer is configuring a Cisco MDS 9000 Series Switch for the first time. After the initial setup process, the name server at IP 192.168.10.11 is missing from the configuration. Which set of actions completes the configuration? A. Enter no at step 21 and reinitialize the installer. Press the Esc key to access ROMMON mode.B. Enter no at step 21 and reload the switch. Configure the advanced IP options.C. Enter yes at step 21 to edit the configuration. Add the line dns-server 192.168.10.11.D. Enter yes at step 21 and log in. Modify the startup configuration DNSAnswer: BQUESTION 451An engineer is implementing a Cisco ACI fabric and must use static VLAN range as part of a VMM deployment. The static VLAN must be incorporated into the dynamic VLAN pool. The existing VLAN pool is set for dynamic allocation. Which action accomplishes this goal?A. Add the VLAN to the pool configured with Inherit Allocation Mode from parent.B. Change the existing VLAN pool to static allocation mode.C. Add a static VLAN allocation range to the VLAN pool.D. Create a static reservation within the dynamic VLAN pool.Answer: CQUESTION 452A network engineer connects the CNA interface of a server to a switch. The switch must bring down all of the VLANs on the interface that are not enabled for FCoE, but the VLANs that are enabled for FCoE should continue to carry SAN traffic without interruption.Which configuration should be applied to the switch to achieve this objective?A. switch(config)# interface Ethernet 2/1switch(config-if)# shutdown IanB. switch(config)# interface vfc 2switch(config-if)# shutdown IanC. switch(config)# Interface Ethernet vfc 2switch(config-if)# shutdown forceD. switch(config)# interface Ethernet 2/1switch(config-if)# shutdown forceAnswer: AQUESTION 453An engineer needs to connect Cisco UCS Fabric Interconnect (FI) to an external storage array. Due to budget limitations, the engineer must connect a Cisco UCS FI directly to an FC storage port. Which two actions must be taken to complete this connection? (Choose two.)A. Configure the fabric interconnect in FC switch mode.B. Set FC zoning to disabled when creating the VSAN.C. Create a storage connection policy.D. Configure the fabric interconnect in end-host mode.E. Create the required VSAN in the SAN cloud.Answer: AEExplanation:To connect a Cisco UCS Fabric Interconnect (FI) directly to an external FC storage array, and considering the budget limitation (i.e., no external FC switch), the correct approach involves placing the FI in FC switch mode, not end-host mode.Option A is Required. When directly connecting to FC storage, the FI must be in FC switch mode to establish direct fabric connectivity (FC end-host mode does not support direct-attached storage).Option E is Required. You must define a VSAN in UCS Manager to map FC traffic correctly within the SAN cloud.QUESTION 454An engineer must configure a Cisco MDS 9000 Series Switch for traffic analysis from the storage array. The storage array is connected to the interface fc2/1 in VSAN 10 and the traffic analyzer to fc4/2. The capture file must include ingress and egress traffic between the switch and the storage array. Also, only traffic in VSAN 10 must be captured.Which configuration set meets these requirements?A. interface fc4/2switchport mode trunkswitchport trunk allow vsan 10no shutdown!span session 1source interface fc2/1 txdestination interface fc4/2 rxno suspendB. interface fc4/2switchport mode SDno shutdown!span session 1source interface fc2/1destination interface fc4/2source filter vsan 10C. interface fc4/2switchport mode autono shutdown!span session 1source interface fc2/1 rxdestination interface fc4/2source filter vsan 10no suspendD. interface fc4/2switchport mode STno shutdown!span session 1source interface fc2/1destination interface fc4/2source filter vsan 10Answer: BQUESTION 455Drag and Drop QuestionRefer to the exhibit. The server is sending traffic to the storage server using Fiber Channel protocol. The requirement is for the N5K-1 to forward traffic to MDS9k-1. Drag and drop the configuration steps from the right to complete the configuration for N5K-1 on the left. Not all configuration steps are used. Answer: Explanation:To meet the requirement for N5K-1 to forward FC traffic to MDS9k-1, the N5K (Nexus 5000) switch needs to operate in N-Port Virtualization (NPV) mode. In NPV mode, the Nexus 5K doesn't perform Fibre Channel fabric services; instead, it acts as a proxy, forwarding traffic to an upstream MDS switch.npv enable puts the N5K into NPV mode.fc2/2 connects upstream to MDS (acts as NP port).switchport mode NP is required for the uplink to the MDS.fc2/1 connects to the server (acts as F port).switchport mode F is used for connecting end devices like servers.QUESTION 456Drag and Drop QuestionRefer to the exhibit. An engineer must provision a VXLAN deployment. The OSPF has already been configured as the underlay protocol. All BGP configurations will be performed using the template method. The deployment must meet these requirements:- The local update source for leaf switches must be loopback 1- The router ID must be the local loopback IP address- The external BGP connections must use a template nameDrag and drop the configuration snippets from the bottom to complete the configuration. Answer: QUESTION 457Cisco Nexus 9000 Series Switches are configured with LACP protocol and default aging timers. What is the impact on the LACP peer during an ISSU upgrade?A. The LACP peer connection terminates.B. The LACP peer session remains up.C. The LACP peer renegotiates the adjacency.D. The LACP peer connection resets.Answer: BExplanation:ISSU and ungraceful switchovers are not supported with LACP fast timers.QUESTION 458A network architect must design an automation solution to initially support networking and also support the server infrastructure in the future. To keep configuration consistency, the network team requires a solution that enforces the desired state of the network and reverts any manual configuration. Which solution meets these goals?A. NX-APIB. AnsibleC. TerraformD. PuppetAnswer: DExplanation:https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/programmability/guide/cisco_nexus7000_programmability_guide_8x/b-cisco-nexus7000-programmability-guide-8x_chapter_01000.pdfQUESTION 459Refer to the exhibit. An engineer installs a new Cisco UCS B-Series server. The requirement is to install an operating system on a LUN that is provided by the Fibre Channel storage array. Which two steps must be configured in the boot policy to accomplish this goal? (Choose two.) A. Disable Enforce vNIC/vHBA/iSCSI Name.B. Add Local CD/DVD and SAN Boot.C. Configure a SAN Boot Target with a WWPN.D. Set Boot Order to External USB and LAN Boot.E. Create iSCSI VNICs and add Local LUN.Answer: BCExplanation:https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Server-Mgmt/4-2/b_Cisco_UCS_Manager_Server_Mgmt_Guide_4_2/chapter_01010.html#task_mhw_dvy_5dbQUESTION 460An engineer must perform a POAP deployment of a Cisco Nexus 9000 Series Switch. The switch must automatically receive its software image and configuration file upon power-on. Also, only UDP is permitted between the Nexus 9000 switch and the server that hosts the Cisco NX-OS system images. Which set of actions completes the configuration?A. Enable option 67. Define TFTP transfer protocolB. Enable option 43. Define HTTP transfer protocol.C. Enable option 46. Define TFTP transfer protocolD. Enable option 35. Define HTTP transfer protocol.Answer: AQUESTION 461Drag and Drop QuestionRefer to the exhibit. Drag and drop the code snippets from the bottom onto the blanks in the code to complete the JSON request that implements the ACL presented. Not all code snippets are used. Answer: QUESTION 462An engineer must allow communication between the APIC controller and an OpenStack OpFlex agent. The agent is running on a compute node directly plugged to a Cisco ACI leaf switch. The engineer must enable and extend Infra VLAN on the port facing the compute and extend the Infra VLAN to the host. Which action must be taken to meet these requirements?A. Enable the Infra VLAN on the Interface Profile policyB. Enable the Infra VLAN on the Attachable Access Entity Profile.C. Add the infra VLAN via the physical domain.D. Add the infra VLAN via the VMM domain.Answer: CQUESTION 463Refer to the exhibit. Which command must be used to restore configuration changes made by disabling the PIM feature and skipping any errors? A. rollback running-config checkpoint new-checkpoint stop-at-first-failureB. rollback running-config checkpoint new-checkpoint verboseC. rollback running-config checkpoint system-fm-pim-best-effortD. rollback running-config checkpoint system-fm-pim atomicAnswer: CQUESTION 464An engineer troubleshoots an Fibre Channel deployment on a Cisco MDS 9000 Series Switch. What does this output indicate about port channel 1? A. Port channel 1 is configured to be an ISL.B. Port channel 1 is configured to connect to a host bus adapter.C. Port channel 1 is configured to connect to an NPIV switch.D. Port channel 1 is configured to connect to an NPV switch.Answer: DQUESTION 465Which component is upgraded by using an EPLD upgrade on a Cisco Nexus 9000 Series Switch?A. dual-homed fabric extendersB. BIOSC. field-programmable gate arraysD. ISSU of the NX-OS versionAnswer: CQUESTION 466An engineer deploys a new Cisco Nexus 5000 Series Switch in an existing environment with strict security policies. The new device should meet these requirements:- Secure end-user ports with minimum configuration effort.- Log security breaches and require manual recovery.- Retain the switch configuration if the device restarts.Which configuration must be used?A. switchport port-securityswitchport port-security max 1switchport port-security mac-address stickyB. switchport port-securityswitchport port-security violation restrictswitchport port-security mac-address stickyC. switchport port-securityswitchport port-security violation shutdownswitchport port-security mac-address dynamicD. switchport port-securityswitchport port-security max 1switchport port-security violation shutdownAnswer: AQUESTION 467An engineer must perform backup and restore of the Cisco UCS Manager configuration. The configuration must be stored on a remote server via XML encoding. The backup must store the configurations of the chassis. FEX, rack servers. lOMs, and blade server.Which set of actions accomplishes these goals?A. Perform a logical configuration backup and run the replace import method.B. Perform a full state configuration backup and run the restore procedure.C. Perform a system configuration backup and run the merge import methodD. Perform an all configuration backup and run the system restore procedure.Answer: CExplanation:System Configuration - The backup file preserves identities for Chassis, FEX, Rack Servers, and user labels for Chassis, FEX, Rack Servers, IOMs and Blade Servers.https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Management/4-1/b_Cisco_UCS_Admin_Mgmt_Guide_4-1/m_backup_and_restore_configuration.html#task_D97990B1ED0F4BCB8469D5A671774B5DQUESTION 468An engineer must optimize ARP responses and reduce unnecessary ARP broadcasts over the VXLAN/EVPN fabric. Which action accomplishes these tasks?A. Configure ip proxy-arp under the VLAN SVI associated with the VXLAN VNI.B. Configure ip proxy-arp within the VXLAN VNI configuration under the VTEP NVE interface.C. Configure suppress-arp within the VXLAN VNI configuration under the VTEP NVE interface.D. Configure suppress-arp under the VLAN SVI associated with the VXLAN VNI.Answer: CQUESTION 470Refer to the exhibit. An engineer must configure a QoS policy that controls only vHBA traffic. Which policy must be used to meet this requirement? A. Best EffortB. Fibre ChannelC. GoldD. PlatinumAnswer: BQUESTION 471An engineer requires the Cisco Fabric Services to distribute NTP configuration only to the members within the scope of a VSAN that belongs to a Cisco Unified Network.Which scope distribution must be selected to meet this requirement?A. Logical scopeB. Physical scopeC. Uncoordinated scopeD. Coordinated scopeAnswer: AQUESTION 472A new user with access privileges in the Finance department moves to a new Admin department. The user must have access privileges to the Admin department data and applications inside the Cisco UCS Manager. Which set of changes must be implemented in Cisco UCS Central for the user to acquire the privileges?A. Create an Admin user account and remove the authentication service for the Finance privileges.B. Disable the Finance user account and add the authentication service for the Admin privileges.C. Create a new locale Admin and add the Admin department to the Admin locale. Delete the old localeD. Finance and remove the Finance department from the Finance locale.Answer: CQUESTION 473A network engineer must download a firmware image from a remote location to a Cisco UCS Fabric Interconnect. The software bundle is over 232 MB in size. The file transfer must use encryption and authentication. Which protocol must be used to accomplish this goal?A. RDPB. HTTPSC. SCPD. TFTPAnswer: CQUESTION 474Refer to the exhibit. An administrator connects a Cisco Nexus Series Switch to the Cisco ACI fabric. The connectivity must allow Cisco Discovery Protocol, LLDP, and LACP. Which action enables the protocols between Switch-1 and the ACI leaf switches? A. Implement an interface policy group.B. Activate a leaf interface.C. Enable an existing interface selector.D. Configure an interface profile.Answer: AQUESTION 475An engineer must perform an initial configuration of VXLAN and MP-BGP EVPN on the Cisco Nexus 9000 Series platform. The underlay must be OSPF, and the VTEP must run with distributed default gateway on a VLAN interface. Which command set must be applied to meet these requirements?A. NX9K(config)# feature nv overlayNX9K(config)# feature vn-segment-vlan-basedNX9K(config)# feature bgpNX9K(config)# nv overlay-evpnNX9K(config)# feature ospfNX9K(config)# feature interface-vlanB. NX9K(config)# feature nv overlayNX9K(config)# feature bfdNX9K(config)# feature vn-segment-vlan-basedNX9K(config)# nv overlay-evpnNX9K(config)# feature ngmvpnNX9K(config)# feature ospfC. NX9K(config)# feature nv overlayNX9K(config)# feature bfdNX9K(config)# feature fabric forwardingNX9K(config)# feature vn-segment-vlan-basedNX9K(config)# nv overlay-evpnNX9K(config)# feature ospfv3D. NX9K(config)# feature nv overlayNX9K(config)# feature bgpNX9K(config)# feature bfdNX9K(config)# feature ngmvpnNX9K(config)# feature ospfNX9K(config)# feature interface-vlanAnswer: AQUESTION 476What is a feature of EPLD upgrades on a Cisco Nexus 7000 Series Switch?A. They do not cause service disruptions.B. They are performed during an ISSU system and kickstart upgrade.C. They are independent of the Cisco NX-OS ISSU process.D. They execute simultaneously on multiple modules.Answer: CExplanation:The EPLD image upgrades are independent from the Cisco NX-OS In Service Software Upgrade (ISSU) process, which upgrades the system and kickstart images with no impact on the network environment.https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/6_x/epld/epld_rn_62.html#20945QUESTION 477Which Cisco HyperFlex ability adds compute or storage-only nodes as required?A. unified managementB. independent resource scalingC. stretch clusteringD. in-cluster synchronous replicationAnswer: BExplanation:https://www.cisco.com/c/dam/global/de_de/products/hyperconverged-infrastructure/le-wp-hxt-op.pdfQUESTION 478Drag and Drop QuestionRefer to the exhibit. The VSAN 4041 and 4042 are exchanged between two Cisco MDS 9000 Series Switches called MDS-1 and MDS-2. The objective is to deploy a security mechanism on MDS-1 to allow MDS-2 to join the fabric exclusively. Drag and drop the code snippets from the bottom onto the boxes in the code to complete the MDS-1 configuration. Not all code snippets are used. Answer: QUESTION 479An engineer is implementing VSAN 10 on multiple Cisco Nexus 5600 Series Switches and must ensure that the full zone set and active zone set are identical across the fabric. Which configuration must be implemented to meet this requirement?A. switch(config)# zoneset distribute vsan 10B. switch(config)# zone-attribute-group name ATTR1 vsan 10C. switch(config)# zoneset distribute full vsan 10D. switch(config)# zoneset activate name ZONE10 vsan 10Answer: CQUESTION 480Which value is missing in the field in the key called “msg” in this JSON response?Request: Response: A. SuccessB. AvailableC. UnavailableD. DropAnswer: AQUESTION 481A DevOps engineer must use Python to manage a Cisco device. The device is in a highly secure DMZ environment. Only trusted Cisco Python libraries can be used.Which solution meets the requirements?A. Develop an on-box Python script that uses trusted Cisco libraries.B. Develop an application by using serverless technologies in a primary cloud provider.C. Develop an off-box Python script that uses trusted Cisco libraries.D. Develop a containerization application that uses trusted Cisco-provided libraries.Answer: DQUESTION 482What is the format of this output? A. SOAPB. YAMLC. XMLD. JSONAnswer: DQUESTION 483A network engineer needs a solution that simplifies the initial deployment of Cisco Nexus Series Switches. The solution must support these requirements:- zero-touch provisioning- configuration through DHCP options- initial configuration from a central TFTP server- no manual configuration management after the initial installationWhich technology supports these goals?A. AnsibleB. Cisco IntersightC. ChefD. POAPAnswer: DQUESTION 484Drag and Drop QuestionRefer to the exhibit. An engineer implements an MP-BGP deployment that must meet these requirements:- Unicast traffic must flow through the Red link between the two autonomous systems.- Multicast traffic must flow through the Green link.- BGP must be configured to carry routing information and differentiate between unicast and multicast traffic to avoid RPF check failure.Drag and drop the SiteA commands from the right onto the blanks in the configuration on the left. Commands can be used more than once. Answer: QUESTION 485What does this configuration create? A. three subnets within a bridge domainB. a CTX1 tenantC. an L3OUT-1 bridge domainD. two L3Out domainsAnswer: BQUESTION 486A network engineer implements a Python script on a Cisco Nexus 9000 Series Switch with redundant supervisors. The script is located on a built-in container that runs as part of the Cisco NX-OS system. The requirement is to automate the periodic transfer of the Python script to a redundant supervisor. In addition, the script must be transferred to an external server using encryption and authentication. Which configuration set meets these requirements?A. Enable the checkpoint feature.Configure an EEM job to transfer the script to the SCP server.B. Implement the guest shell synchronization feature.Configure a scheduler job to transfer the script to the TFTP server.C. Enable the checkpoint feature.Configure a scheduler job to transfer the script to the HTTP server.D. Implement the guest shell synchronization feature.Configure a CRON job to transfer the script to the SCP server.Answer: AQUESTION 487Refer to the exhibit. A network engineer must monitor the traffic from the server on VLAN 80. All source traffic from the server must be captured on the monitoring device. Which configuration set meets these requirements? A. switch(config-monitor)# destination interface ethernet 1/1switch(config-monitor)# source vlan 80B. switch(config-monitor)# destination interface ethernet 1/1switch(config-monitor)# filter vlan 80C. switch(config-monitor)# destination interface ethernet 1/2switch(config-monitor)# filter vlan 80 rx txD. switch(config-monitor)# destination interface ethernet 1/2switch(config-monitor)# source vlan 80 rxAnswer: AQUESTION 488The network team needs permissions to access the Cisco UCS B-Series Servers via the Cisco UCS Manager GUI to configure the network and collect information about faults. The administrator wants to assign these permissions to the newly configured user called netops. Which set of tasks must the administrator perform to accomplish these goals?A. Implement username netops on the locally authenticated user.Assign the roles of network administrator and operations.B. Configure username netops on the Cisco UCS Manager login profile.Assign the roles of AAA administrator and operations.C. Enable username netops on the authenticated users.Assign the roles of storage administrator and facility manager.D. Deploy username netops on the users locales.Assign the roles of networks security and facility manager.Answer: AQUESTION 489ASAN administrator must implement infrastructure monitoring for the Fibre Channel storage environment. The storage environment consists of a standalone Cisco Nexus 9000 Series Switch and Cisco MDS 9000 Series Switches. The goal is to be able to visualize the SAN, support VXLAN overlays, and identify storage slow drain issues. Which monitoring solution accomplishes this task?A. Cisco DCNMB. Cisco APICC. Cisco IntersightD. Cisco Prime InfrastructureAnswer: AQUESTION 490Refer to the exhibit. Which feature must be implemented on Postman to receive the response from a Cisco Nexus 9000 Series Switch? A. API token in the APIC-cookieB. username and password in the Nexus-cookieC. username and password in the api/mo headerD. certificate in the HTML Nexus-API headerAnswer: AExplanation:Subsequent operations on the REST API can use this token value as a cookie named APIC-cookie to authenticate future requests.https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/3-x/rest-api-config/b_Cisco_APIC_REST_API_Configuration_Guide_3x/b_Cisco_APIC_REST_API_Configuration_Guide_chapter_01.htmlQUESTION 491Refer to the exhibit. An engineer must activate the port-security database on a Cisco MDS 9000 Series Switch for VSAN 100, but receives the error shown. Which command completes the configuration? A. port-security config-enable vsan 100B. port-security vsan 100 database activeC. port-security enabled mode vsan 100D. port-security activate vsan 100 forceAnswer: DExplanation:https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli/CLIConfigurationGuide/psec.html#54776QUESTION 492An engineer builds a new Cisco ACI fabric. Which VLAN must be configured as the infrastructure VLAN during the Cisco APIC setup script?A. a unique in-band management VLANB. a unique native VLANC. a unique OOB management VLAND. a unique VLAN within the networkAnswer: DQUESTION 493Refer to the exhibit. An engineer must configure port security on the Cisco Nexus 5000 Series Switch that meets these requirements:- Port security must be applied on VSAN 10 only.- NWWN 20:10:10:10:10:10:10:10 to log in through SAN port-channel 2.- Any WWN must be allowed to log in through interfaces fc1/1, fc1/2, fc1/3.- Auto learning must be disabled.Which command set satisfies these conditions? A. Nexus5K(config)# port-security database vsan 10Nexus5K(config-port-security)# nwwn 20:10:10:10:10:10:10:10 interface san-port-channel 2Nexus5K(config-port-security)# any wwn interface fc1/1-3Nexus5K(config-port-security)# port-security commit vsan 10B. Nexus5K(config)# port-security activate vsan 10 no auto-learnNexus5K(config)# port-security database vsan 10Nexus5K(config-port-security)# nwwn 20:10:10:10:10:10:10:10 interface san-port-channel 2Nexus5K(config-port-security)# any wwn interface fc1/1-3C. Nexus5K(config)# port-security database vsan 10Nexus5K(config-port-security)# nwwn 20:01:01:01:01:01:01:01 interface san port-channel 5Nexus5K(config-port-security)# any wwn interface fc1/1-3Nexus5K(config)# port-security database diff active vsan 10D. Nexus5K(config)# port-security database vsan 10Nexus5K(config-port-security)# nwwn 20:01:01:01:01:01:01:01 interface port-channel 5Nexus5K(config-port-security)# any wwn interface fc1/1-3Nexus5K(config)# port-security database diff active vsan 10Answer: AExplanation:https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/configuration/guides/cli_3_2/psec.html#wp1298070QUESTION 494Drag and Drop QuestionDrag and drop the telemetry concepts from the left onto their functions on the right. Answer: QUESTION 495A SAN administrator receives reports about latency and response-time issues that impact various applications. The incidents have gradually increased in frequency and severity and have reached a critical state. Which DCNM configuration set identifies the source of the issues?A. - Slow Drain Analysis- Duration Once/Run Immediately- Start/Stop Collection- Current Jobs/ResultB. - SAN Insights- Storage Enclosure- Select Host/Initiator-Target PairC. - Events- Time Now- Select MDS Switch- Advanced Filter/SourceD. - FC Flows- Interval 24 Hours- Export/SaveAnswer: AQUESTION 496Refer to the exhibit. An engineer must upgrade the N9K_2 device to the latest code. In preparation for the upgrade, the engineer wants to divert all data plane traffic between RTR_1 and RTR_2 to N9K_4 and N9K_5. The traffic redirection must happen without forcing any OSPFv2 adjacency change in the network. Which configuration set must be used on N9K_2 OSPF process 1 to accomplish these goals? A. area 0 stub no-summaryB. passive-interface defaultC. max-metric router-lsaD. area 0 filter-list route-map DENY_ALL outAnswer: CQUESTION 497Drag and Drop QuestionDrag and drop the streaming telemetry component on the left to its function on the right. Not all components are used. Answer: QUESTION 498Refer to the exhibit. A traffic collector virtual machine is installed inside the Cisco UCS server. The collector must monitor traffic that is received on G1/2 with ERSPAN. Which set of actions must be taken to send the traffic to the traffic collector? A. Configure ERSPAN.Configure a source session on Cisco UCS Manager.B. Configure SPAN.Configure a source session on the SW1 switch.C. Configure SPAN.Configure a source session on Cisco UCS Manager.D. Configure ERSPAN.Configure a source session on the SW1 switch.Answer: DQUESTION 499Which device alias database is shown by this output?switch# show device-alias databasedevice-alias name SampleName pwwn 24:40:00:e7:09:0b:27:56A. inactive databaseB. effective databaseC. pending databaseD. zoning databaseAnswer: DQUESTION 500Which storage solution operates at the file level and contains its own native lightweight operating system on simplified hardware?A. NASB. SANC. unified fabricD. standard file serverAnswer: AExplanation:A NAS device is an appliance that directly connects to the network either through a hardwired Ethernet (RJ45) cable or via Wi-Fi, thus creating a LAN instead of WAN. It is assigned an IP address, and data transfer between users, servers, and a NAS via TCP/IP. NAS operates with a traditional file system — either a New Technology File System (NTFS) or NFS for remote file services and data sharing. All storage on the device is accessed at the file level through a file share.QUESTION 501Which component becomes unavailable for a maximum of 80 seconds during a nondisruptive Cisco NX-OS upgrade?A. supervisor moduleB. default VSANC. control planeD. data planeAnswer: CResources From:1.2025 Latest Braindump2go 350-601 Exam Dumps (PDF & VCE) Free Share:https://www.braindump2go.com/350-601.html2.2025 Latest Braindump2go 350-601 PDF and 350-601 VCE Dumps Free Share:https://drive.google.com/drive/folders/1M-Px6bHjOJgp4aPsLoYq-hgm90ZKxV_i?usp=sharing3.2025 Free Braindump2go 350-601 Exam Questions Download:https://www.braindump2go.com/free-online-pdf/350-601-VCE-Dumps(436-501).pdfFree Resources from Braindump2go,We Devoted to Helping You 100% Pass All Exams! --------------------------------------------------- Images: --------------------------------------------------- --------------------------------------------------- Post date: 2025-12-18 03:47:45 Post date GMT: 2025-12-18 03:47:45 Post modified date: 2025-12-18 03:55:55 Post modified date GMT: 2025-12-18 03:55:55 ____________________________________________________________________________________________ Export of Post and Page as text file has been powered by [ Universal Post Manager ] plugin from www.gconverters.com