This page was exported from Offer Free Microsoft and Cisco Exam Dumps [ http://www.hitachidumps.com ] Export date:Sun Feb 1 9:34:26 2026 / +0000 GMT ___________________________________________________ Title: [2025-December-New]Braindump2go 350-701 VCE Dumps Free Share[Q431-Q515] --------------------------------------------------- 2025/December Latest Braindump2go 350-701 Exam Dumps with PDF and VCE Free Updated Today! Following are some new Braindump2go 350-701 Real Exam Questions!QUESTION 431An engineer is configuring device-hardening on a router in order to prevent credentials from being seen if the router configuration was compromised. Which command should be used?A. service password-encryptionB. username <username> privilege 15 password <password>C. service password-recoveryD. username < username> password <password>Answer: AQUESTION 432Which security solution protects users leveraging DNS-layer security?A. Cisco ISEB. Cisco FTDC. Cisco UmbrellaD. Cisco ASAAnswer: CQUESTION 433Which CoA response code is sent if an authorization state is changed successfully on a Cisco IOS device?A. CoA-NCLB. CoA-NAKC. CoA-ACKD. CoA-MABAnswer: CExplanation:https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_usr_aaa/configuration/15-sy/sec-usr-aaa-15-sy-book/sec-rad-coa.htmlQUESTION 434Which security solution uses NetFlow to provide visibility across the network, data center, branch offices, and cloud?A. Cisco CTAB. Cisco Secure Network AnalyticsC. Cisco Encrypted Traffic AnalyticsD. Cisco UmbrellaAnswer: BQUESTION 435How does a WCCP-configured router identify if the Cisco WSA is functional?A. If an ICMP ping fails three consecutive times between a router and the WSA, traffic is no longer transmitted to the router.B. If an ICMP ping fails three consecutive times between a router and the WSA, traffic is no longer transmitted to the WSA.C. The WSA sends a Here-l-Am message every 10 seconds, and the router acknowledges with an I-See-You message.D. The router sends a Here-l-Am message every 10 seconds, and the WSA acknowledges with an I-See-You message.Answer: CExplanation:When the WCCP service is active on a web cache server (WSA in this case), it periodically sends a WCCP HERE I AM broadcast or unicast message to the unit operating as a WCCP router.If the information received in this message matches what is expected, the WCCP router replies with a WCCP I SEE YOU message.QUESTION 436Which solution supports high availability in routed or transparent mode as well as in northbound and southbound deployments?A. Cisco FTD with Cisco ASDMB. Cisco FTD with Cisco FMCC. Cisco Firepower NGFW physical appliance with Cisco. FMCD. Cisco Firepower NGFW Virtual appliance with Cisco FMCAnswer: BQUESTION 437Which Cisco ASA Platform mode disables the threat detection features except for Advanced Threat Statistics?A. clusterB. transparentC. routedD. multiple contextAnswer: DExplanation:https://www.cisco.com/c/en/us/td/docs/security/asa/asa96/configuration/firewall/asa-96-firewall-config/conns-threat.html#ID-2132-00000035QUESTION 438Which benefit does DMVPN provide over GETVPN?A. DMVPN supports QoS, multicast, and routing, and GETVPN supports only QoS.B. DMVPN is a tunnel-less VPN, and GETVPN is tunnel-based.C. DMVPN supports non-IP protocols, and GETVPN supports only IP protocols.D. DMVPN can be used over the public Internet, and GETVPN requires a private network.Answer: DQUESTION 439An organization has DHCP servers set up to allocate IP addresses to clients on the LAN.What must be done to ensure the LAN switches prevent malicious DHCP traffic while also distributing IP addresses to the correct endpoints?A. Configure Dynamic ARP Inspection and add entries in the DHCP snooping databaseB. Configure DHCP snooping and set an untrusted interface for all clientsC. Configure Dynamic ARP Inspection and antispoofing ACLs in the DHCP snooping databaseD. Configure DHCP snooping and set a trusted interface for the DHCP serverAnswer: DExplanation:DHCP snooping acts like a firewall between untrusted hosts and DHCP servers. You use DHCP snooping to differentiate between untrusted interfaces connected to the end user and trusted interfaces connected to the DHCP server or another switch.QUESTION 440Which two parameters are used to prevent a data breach in the cloud? (Choose two.)A. DLP solutionsB. strong user authenticationC. encryptionD. complex cloud-based web proxiesE. antispoofing programsAnswer: BCExplanation:Strong user authentication: This ensures only authorized individuals can access cloud data. Methods include multi-factor authentication (MFA) and strong passwords.Encryption: This scrambles data at rest and in transit, making it unreadable to unauthorized users even if intercepted.https://www.otava.com/blog/7-ways-to-prevent-data-leaks-in-the-cloud/https://www.getkisi.com/blog/7-tips-prevent-cloud-security-threatsQUESTION 441Which technology enables integration between Cisco ISE and other platforms to gather and share network and vulnerability data and SIEM and location information?A. pxGridB. NetFlowC. SNMPD. Cisco TalosAnswer: AExplanation:Cisco ISE uses Cisco Platform Exchange Grid (pxGrid) technology to share contextual data with leading SIEM and TD partner solutions.QUESTION 442Which Cisco DNA Center Intent API action is used to retrieve the number of devices known to a DNA Center?A. GET https://fqdnOrlPofDnaCenterPlatform/dna/intent/api/v1/network-device/countB. GET https://fqdnOrlPofDnaCenterPlatform/dna/intent/api/v1/network-deviceC. GET https://fqdnOrlPofDnaCenterPlatform/dna/intent/api/v1/networkdevice?parameter1=value&param eter2=value&....D. GET https://fqdnOrlPofDnaCenterPlatform/dna/intent/api/v1/networkdevice/startIndex/recordsToReturnAnswer: AExplanation:https://developer.cisco.com/docs/dna-center/#!get-device-countQUESTION 443An organization must add new firewalls to its infrastructure and wants to use Cisco ASA or Cisco FTD. The chosen firewalls must provide methods of blocking traffic that include offering the user the option to bypass the block for certain sites after displaying a warning page and to reset the connection.Which solution should the organization choose?A. Cisco FTD because it supports system rate level traffic blocking, whereas Cisco ASA does notB. Cisco ASA because it allows for interactive blocking and blocking with reset to be configured via the GUI, whereas Cisco FTD does not.C. Cisco FTD because it enables interactive blocking and blocking with reset natively, whereas Cisco ASA does notD. Cisco ASA because it has an additional module that can be installed to provide multiple blocking capabilities, whereas Cisco FTD does not.Answer: CQUESTION 444An engineer is configuring web filtering for a network using Cisco Umbrella Secure Internet Gateway. The requirement is that all traffic needs to be filtered. Using the SSL decryption feature, which type of certificate should be presented to the end-user to accomplish this goal?A. third-partyB. self-signedC. organization owned rootD. SubCAAnswer: CQUESTION 445An engineer needs to configure an access control policy rule to always send traffic for inspection without using the default action. Which action should be configured for this rule?A. monitorB. allowC. blockD. trustAnswer: BExplanation:Rule 4: Allow is the final rule. For this rule, matching traffic is allowed; however, prohibited files, malware, intrusions, and exploits within that traffic are detected and blocked. Remaining non-prohibited, non-malicious traffic is allowed to its destination, though it is still subject to identity requirements and rate limiting. You can configure Allow rules that perform only file inspection, or only intrusion inspection, or neither.https://www.cisco.com/c/en/us/td/docs/security/firepower/610/configuration/guide/fpmc-config-guide-v61/access_control_rules.htmlQUESTION 446When NetFlow is applied to an interface, which component creates the flow monitor cache that is used to collect traffic based on the key and nonkey fields in the configured record?A. recordsB. flow exporterC. flow samplerD. flow monitorAnswer: DExplanation:Flow monitors are the Flexible NetFlow component that is applied to interfaces to perform network traffic monitoring. Flow monitors consist of a record and a cache. You add the record to the flow monitor after you create the flow monitor. The flow monitor cache is automatically created at the time the flow monitor is applied to the first interface. Flow data is collected from the network traffic during the monitoring process based on the key and nonkey fields in the record, which is configured for the flow monitor and stored in the flow monitor cache.QUESTION 447Which encryption algorithm provides highly secure VPN communications?A. 3DESB. AES 256C. AES 128D. DESAnswer: BQUESTION 448An administrator needs to configure the Cisco ASA via ASDM such that the network management system can actively monitor the host using SNMPv3.Which two tasks must be performed for this configuration? (Choose two.)A. Specify the SNMP manager and UDP port.B. Specify an SNMP user groupC. Specify a community string.D. Add an SNMP USM entryE. Add an SNMP host access entryAnswer: BDExplanation:https://www.cisco.com/c/en/us/td/docs/security/asa/asa92/asdm72/general/asa-general-asdm/monitor-snmp.htmlQUESTION 449Which Cisco ASA deployment model is used to filter traffic between hosts in the same IP subnet using higher-level protocols without readdressing the network?A. routed modeB. transparent modeC. single context modeD. multiple context modeAnswer: BExplanation:https://grumpy-networkers-journal.readthedocs.io/en/latest/VENDOR/CISCO/FIREWALL/ASA/TRANSPARENTFW.htmlQUESTION 450Which function is performed by certificate authorities but is a limitation of registration authorities?A. accepts enrollment requestsB. certificate re-enrollmentC. verifying user identityD. CRL publishingAnswer: DQUESTION 451Which two functions does the Cisco Advanced Phishing Protection solution perform in trying to protect from phishing attacks? (Choose two.)A. blocks malicious websites and adds them to a block listB. does a real-time user web browsing behavior analysisC. provides a defense for on-premises email deploymentsD. uses a static algorithm to determine maliciousE. determines if the email messages are maliciousAnswer: CEExplanation:After the analysis, potentially malicious messages are remediated from the recipient mailbox automatically, based on the pre-configured policies on the AdvancedPhishingProtection cloud service.Set up the email gateway as a sensor engine on the Cisco Advanced Phishing Protection cloud service.This deploys the email gateway as a lightweight sensor via the cloud or on-premise.https://www.cisco.com/c/en/us/td/docs/security/ces/user_guide/esa_user_guide_13-5/b_ESA_Admin_Guide_ces_13-5/m_advanced_phishing_protection.pdfhttps://www.cisco.com/c/en/us/td/docs/security/esa/esa13-5/user_guide/b_ESA_Admin_Guide_13-5/m_advanced_phishing_protection.htmlQUESTION 452What is a feature of NetFlow Secure Event Logging?A. It exports only records that indicate significant events in a flow.B. It filters NSEL events based on the traffic and event type through RSVP.C. It delivers data records to NSEL collectors through NetFlow over TCP only.D. It supports v5 and v8 templates.Answer: AExplanation:https://www.cisco.com/c/en/us/td/docs/security/asa/asa91/asdm71/general/asdm_71_general_config/monitor_nsel.pdfQUESTION 453A hacker initiated a social engineering attack and stole username and passwords of some users within a company. Which product should be used as a solution to this problem?A. Cisco NGFWB. Cisco AnyConnectC. Cisco AMP for EndpointsD. Cisco DuoAnswer: DQUESTION 454Which technology provides the benefit of Layer 3 through Layer 7 innovative deep packet inspection, enabling the platform to identify and output various applications within the network traffic flows?A. Cisco NBAR2B. Cisco ASAVC. Account on ResolutionD. Cisco Prime InfrastructureAnswer: AQUESTION 455Which RADIUS feature provides a mechanism to change the AAA attributes of a session after it is authenticated?A. AuthorizationB. AccountingC. AuthenticationD. CoAAnswer: DQUESTION 456Which type of data exfiltration technique encodes data in outbound DNS requests to specific servers and can be stopped by Cisco Umbrella?A. DNS tunnelingB. DNS flood attackC. cache poisoningD. DNS hijackingAnswer: AExplanation:https://umbrella.cisco.com/blog/improvements-dns-tunneling-dns-exfiltration-detectionQUESTION 457A large organization wants to deploy a security appliance in the public cloud to form a site-to-site VPN and link the public cloud environment to the private cloud in the headquarters data center. Which Cisco security appliance meets these requirements?A. Cisco Cloud OrchestratorB. Cisco ASAVC. Cisco WSAVD. Cisco Stealthwatch CloudAnswer: BQUESTION 458Which CLI command is used to enable URL filtering support for shortened URLs on the Cisco Secure Email Gateway?A. webadvancedconfigB. websecurity advancedconfigC. outbreakconfigD. websecurity configAnswer: BExplanation:https://www.cisco.com/c/en/us/support/docs/security/email-security-appliance/118775-technote-esa-00.htmlQUESTION 459Which standard is used to automate exchanging cyber threat information?A. TAXILB. MITREC. IoCD. STIXAnswer: AExplanation:TAXII, short for Trusted Automated eXchange of Intelligence Information, defines how cyber threat information can be shared via services and message exchanges.QUESTION 460What is a function of the Layer 4 Traffic Monitor on a Cisco WSA?A. blocks traffic from URL categories that are known to contain malicious contentB. decrypts SSL traffic to monitor for malicious contentC. monitors suspicious traffic across all the TCP/UDP portsD. prevents data exfiltration by searching all the network traffic for specified sensitive informationAnswer: CQUESTION 461A network engineer entered the snmp-server user asmith myv7 auth sha cisco priv aes 256 cisc0xxxxxxxxx command and needs to send SNMP information to a host at 10.255.255.1.Which command achieves this goal?A. snmp-server host inside 10.255.255.1 version 3 myv7B. snmp-server host inside 10.255.255.1 snmpv3 myv7C. snmp-server host inside 10.255.255.1 version 3 asmithD. snmp-server host inside 10.255.255.1 snmpv3 asmithAnswer: CExplanation:ASA(config)#snmp-server host inside 10.1.1.1 version 3 administrator <- specify the NMS hostQUESTION 462Refer to the exhibit. What are two indications of the Cisco Firepower Services Module configuration? (Choose two.) A. The module is operating in IDS mode.B. The module fails to receive redirected trafficC. Traffic is blocked if the module fails.D. Traffic continues to flow if the module fails.E. The module is operating in IPS mode.Answer: ADExplanation:sfr {fail-open | fail-close [monitor-only]} <- There's a couple different options here. The first one is fail-open which means that if the Firepower software module is unavailable, the ASA will continue to forward traffic. fail-close means that if the Firepower module fails, the traffic will stop flowing. While this doesn't seem ideal, there might be a use case for it when securing highly regulated environments. The monitor-only switch can be used with both and basically puts the Firepower services into IDS-mode only. This might be useful for initial testing or setup.QUESTION 463Why is it important for the organization to have an endpoint patching strategy?A. so the organization can identify endpoint vulnerabilitiesB. so the internal PSIRT organization is aware of the latest bugsC. so the network administrator is notified when an existing bug is encounteredD. so the latest security fixes are installed on the endpointsAnswer: DQUESTION 464An email administrator is setting up a new Cisco Secure Email Gateway. The administrator wants to enable the blocking of greymail for the end user. Which feature must the administrator enable first?A. File AnalysisB. IP Reputation FilteringC. Intelligent Multi-ScanD. Anti-Virus FilteringAnswer: CQUESTION 465What limits communication between applications or containers on the same node?A. microsegmentationB. container orchestrationC. microservicingD. Software-Defined AccessAnswer: AExplanation:Microsegmentation is the practice of dividing a computer network into smaller segments, or microsegments, in order to limit communication between applications or containers on the same node. This approach uses network security policies to define what traffic is allowed to flow between different microsegments, which helps to reduce the attack surface and minimize the impact of a security breach. Microsegmentation is often used in conjunction with other security measures such as firewalls and intrusion detection systems to provide a more comprehensive security strategy.QUESTION 466Which open source tool does Cisco use to create graphical visualizations of network telemetry on Cisco IOS XE devices?A. InfluxDBB. SplunkC. SNMPD. GrafanaAnswer: DExplanation:https://blogs.cisco.com/developer/getting-started-with-model-driven-telemetryQUESTION 467How does the Cisco WSA enforce bandwidth restrictions for web applications?A. It implements a policy route to redirect application traffic to a lower-bandwidth link.B. It dynamically creates a scavenger class QoS policy and applies it to each client that connects through the WSA.C. It sends commands to the uplink router to apply traffic policing to the application traffic.D. It simulates a slower link by introducing latency into application traffic.Answer: DExplanation:https://www.cisco.com/c/en/us/td/docs/security/wsa/wsa11-7/user_guide/b_WSA_UserGuide_11_7/b_WSA_UserGuide_11_7_chapter_01111.pdfQUESTION 468Which two components do southbound APIs use to communicate with downstream devices? (Choose two.)A. services running over the networkB. OpenFlowC. external application APIsD. applications running over the networkE. OpFlexAnswer: BEQUESTION 469What is the term for when an endpoint is associated to a provisioning WLAN that is shared with guest access, and the same guest portal is used as the BYOD portal?A. single-SSID BYODB. multichannel GUIC. dual-SSID BYODD. streamlined accessAnswer: CExplanation:If guest access is utilizing one of the named guest account, then same guest portal can be used for employee BYOD portal. This flow is called Dual-SSID BYOD, where the endpoint is associated to a provisioning WLAN which is typically shared with guest access.https://community.cisco.com/t5/security-knowledge-base/ise-byod-dual-vs-single-ssid-onboarding/ta-p/3641422QUESTION 470Which feature within Cisco ISE verifies the compliance of an endpoint before providing access to the network?A. PostureB. ProfilingC. pxGridD. MABAnswer: AQUESTION 471Which MDM configuration provides scalability?A. pushing WPA2-Enterprise settings automatically to devicesB. enabling use of device features such as camera useC. BYOD support without extra appliance or licensesD. automatic device classification with level 7 fingerprintingAnswer: CQUESTION 472Which Cisco ISE service checks the compliance of endpoints before allowing the endpoints to connect to the network?A. postureB. profilerC. Cisco TrustSecD. Threat Centric NACAnswer: AQUESTION 473Which endpoint protection and detection feature performs correlation of telemetry, files, and intrusion events that are flagged as possible active breaches?A. retrospective detectionB. indication of compromiseC. file trajectoryD. elastic searchAnswer: BExplanation:https://www.cisco.com/c/en/us/solutions/collateral/enterprise-networks/advanced-malware-protection/solution-overview-c22-734228.htmlQUESTION 474Which feature enables a Cisco ISR to use the default bypass list automatically for web filtering?A. filtersB. group keyC. company keyD. connectorAnswer: DQUESTION 475A network engineer has configured a NTP server on a Cisco ASA. The Cisco ASA has IP reachability to the NTP server and is not filtering any traffic. The show ntp association detail command indicates that the configured NTP server is unsynchronized and has a stratum of 16. What is the cause of this issue?A. Resynchronization of NTP is not forcedB. NTP is not configured to use a working server.C. An access list entry for UDP port 123 on the inside interface is missing.D. An access list entry for UDP port 123 on the outside interface is missing.Answer: BExplanation:The stratum level of a NTP server represents its level of precision and accuracy, a stratum level of 16 indicates that the server is unsynchronized and cannot be used as a time source. This means that the configured NTP server is not working and cannot provide correct time to the ASA. The engineer should check the NTP server configuration and availability, also it's important to check if the NTP server is reachable and configured to use the correct IP address.QUESTION 476When a next-generation endpoint security solution is selected for a company, what are two key deliverables that help justify the implementation? (Choose two.)A. signature-based endpoint protection on company endpointsB. macro-based protection to keep connected endpoints safeC. continuous monitoring of all files that are located on connected endpointsD. email integration to protect endpoints from malicious content that is located in emailE. real-time feeds from global threat intelligence centersAnswer: CEQUESTION 477What is the process of performing automated static and dynamic analysis of files in an isolated environment against preloaded behavioral indicators for threat analysis?A. deep visibility scanB. point-in-time checksC. advanced sandboxingD. advanced scanningAnswer: CExplanation:https://www.cisco.com/c/en_in/products/security/advanced-malware-protection/index.htmlQUESTION 478Which solution is made from a collection of secure development practices and guidelines that developers must follow to build secure applications?A. AFLB. Fuzzing FrameworkC. RadamsaD. OWASPAnswer: DQUESTION 479What do tools like Jenkins, Octopus Deploy, and Azure DevOps provide in terms of application and infrastructure automation?A. continuous integration and continuous deploymentB. cloud application security brokerC. compile-time instrumentationD. container orchestrationAnswer: AQUESTION 480Which direction do attackers encode data in DNS requests during exfiltration using DNS tunneling?A. inboundB. north-southC. east-westD. outboundAnswer: DQUESTION 481Which Cisco DNA Center RESTful PNP API adds and claims a device into a workflow?A. api/v1/onboarding/workflowB. api/v1/onboarding/pnp-device/importC. api/v1/onboarding/pnp-deviceD. api/v1/file/configAnswer: BExplanation: QUESTION 482What is a feature of container orchestration?A. ability to deploy Amazon ECS clusters by using the Cisco Container Platform data planeB. ability to deploy Amazon EKS clusters by using the Cisco Container Platform data planeC. ability to deploy Kubernetes clusters in air-gapped sitesD. automated daily updatesAnswer: CQUESTION 483What are two security benefits of an MDM deployment? (Choose two.)A. robust security policy enforcementB. privacy control checksC. on-device content managementD. distributed software upgradeE. distributed dashboardAnswer: ACQUESTION 484An organization is implementing AAA for their users. They need to ensure that authorization is verified for every command that is being entered by the network administrator. Which protocol must be configured in order to provide this capability?A. EAPOLB. SSHC. RADIUSD. TACACS+Answer: DExplanation:Check and send every executed command to ISE for verification.https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200208-Configure-ISE-2-0-IOS-TACACS-Authentic.htmlQUESTION 485What is the recommendation in a zero-trust model before granting access to corporate applications and resources?A. to use multifactor authenticationB. to use strong passwordsC. to use a wired network, not wirelessD. to disconnect from the network when inactiveAnswer: AQUESTION 486Which Cisco AMP feature allows an engineer to look back to trace past activities, such as file and process activity on an endpoint?A. endpoint isolationB. advanced searchC. advanced investigationD. retrospective securityAnswer: DExplanation:Retrospective security is the ability to look back in time and trace processes, file activities, and communications in order to understand the full extent of an infection, establish root cause, and perform remediation. The need for retrospective security arises when any indication of a compromise occurs, such as an event trigger, a change in the disposition of a file, or an IoC trigger.QUESTION 487Which solution stops unauthorized access to the system if a user's password is compromised?A. VPNB. MFAC. AMPD. SSLAnswer: BQUESTION 488What is a benefit of using Cisco Tetration?A. It collects telemetry data from servers and then uses software sensors to analyze flow information.B. It collects policy compliance data and process details.C. It collects enforcement data from servers and collects interpacket variation.D. It collects near-real time data from servers and inventories the software packages that exist on servers.Answer: AQUESTION 489How does Cisco Umbrella protect clients when they operate outside of the corporate network?A. by modifying the registry for DNS lookupsB. by using Active Directory group policies to enforce Cisco Umbrella DNS serversC. by using the Cisco Umbrella roaming clientD. by forcing DNS queries to the corporate name serversAnswer: CExplanation:The Cisco Umbrella roaming client is a lightweight software that can be installed on Windows and Mac laptops, as well as on iOS and Android mobile devices. The client sends DNS queries to the Cisco Umbrella global network, where the queries are filtered and either allowed or blocked based on the organization's security policies.The Cisco Umbrella roaming client also provides visibility into the security posture of the devices, regardless of their location. This allows organizations to detect and respond to threats in real-time, regardless of where the device is located.https://www.cisco.com/c/en/us/products/security/umbrella/umbrella-roaming.htmlQUESTION 490Which API method and required attribute are used to add a device into Cisco DNA Center with the native API?A. GET and serialNumberB. userSudiSerlalNos and deviceInfoC. POST and nameD. lastSyncTime and pidAnswer: CExplanation:GET information about clients, sites, topology, devices, and issues; Create (POST) and manage (PUT, DELETE) sites, devices, IP Pools, edge and border devices, and authentication profiles.https://developer.cisco.com/docs/dna-center/#!add-device-1QUESTION 491What are two facts about WSA HTTP proxy configuration with a PAC file? (Choose two.)A. It is defined as a Transparent proxy deployment.B. In a dual-NIC configuration, the PAC file directs traffic through the two NICs to the proxy.C. The PAC file, which references the proxy, is deployed to the client web browser.D. It is defined as an Explicit proxy deployment.E. It is defined as a Bridge proxy deployment.Answer: CDQUESTION 492Which solution should be leveraged for secure access of a CI/CD pipeline?A. Duo Network GatewayB. remote access clientC. SSL WebVPND. Cisco FTD network gatewayAnswer: AQUESTION 493Which function is included when Cisco AMP is added to web security?A. multifactor, authentication-based user identityB. detailed analytics of the unknown file's behaviorC. phishing detection on emailsD. threat prevention on an infected endpointAnswer: BQUESTION 494A small organization needs to reduce the VPN bandwidth load on their headend Cisco ASA in order to ensure that bandwidth is available for VPN users needing access to corporate resources on the 10.0.0.0/24 local HQ network.How is this accomplished without adding additional devices to the network?A. Use split tunneling to tunnel traffic for the 10.0.0.0/24 network only.B. Configure VPN load balancing to distribute traffic for the 10.0.0.0/24 network,C. Configure VPN load balancing to send non-corporate traffic straight to the internet.D. Use split tunneling to tunnel all traffic except for the 10.0.0.0/24 network.Answer: AExplanation:Split tunneling allows the VPN client to choose which network traffic to send through the VPN tunnel and which traffic to send through the local internet connection. By configuring split tunneling to only tunnel traffic for the 10.0.0.0/24 network, the organization can reduce the VPN bandwidth load on the headend Cisco ASA. This way, only the necessary traffic to access corporate resources on the local HQ network will be sent through the VPN, while other non-corporate traffic can be sent through the local internet connection, thus reducing the VPN load.QUESTION 495Which solution detects threats across a private network, public clouds, and encrypted traffic?A. Cisco StealthwatchB. Cisco CTAC. Cisco Encrypted Traffic AnalyticsD. Cisco UmbrellaAnswer: AExplanation:Cisco Stealthwatch is a solution that detects threats across a private network, public clouds, and encrypted traffic.Cisco Stealthwatch is a network security and threat detection platform that helps organizations protect their networks and data from cyber threats. It uses advanced analytics and machine learning to continuously monitor network traffic and identify suspicious activity, such as malware infections, data exfiltration, and other threats. Stealthwatch can detect threats across a private network, public clouds, and encrypted traffic, providing organizations with a comprehensive view of their security posture and helping them to respond quickly to potential threats.QUESTION 496Which Cisco security solution integrates with cloud applications like Dropbox and Office 365 while protecting data from being exfiltrated?A. Cisco TajosB. Cisco Steaithwatch CloudC. Cisco CloudlockD. Cisco Umbrella InvestigateAnswer: CExplanation:Cisco Cloudlock is an API-based broker that helps reduce compromises, application risks, and data breaches in an environment that is not on-premise. It provides protection of sensitive data throughout the full environment and helps secure cloud-based email, file storage, and web applications. Cloudlock detects and protects sensitive data across all cloud services, including cloud storage and collaboration services such as AWS, Box, Dropbox, Google Drive, Microsoft OneDrive, Salesforce, and more.QUESTION 497Drag and Drop QuestionDrag and drop the exploits from the left onto the type of security vulnerability on the right. Answer: QUESTION 498Drag and Drop QuestionDrag and drop the concepts from the left onto the correct descriptions on the right. Answer: QUESTION 499When network telemetry is implemented, what is important to be enabled across all network infrastructure devices to correlate different sources?A. CDPB. syslog C. NTPD. DNSAnswer: CExplanation:Without time synchronization, it is very difficult to correlate different sources of telemetry.https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Security/Baseline_Security/securebasebook/sec_chap5.htmlQUESTION 500Drag and Drop QuestionDrag and drop the Cisco CWS redirection options from the left onto the capabilities on the right. Answer: QUESTION 501What is the concept of continuous integration/continuous delivery pipelining?A. The project code is centrally maintained, and each code change should trigger an automated build and test sequence.B. The project is split into time-limited cycles, and focuses on pair programming for continuous code review.C. The project is split into several phases where one phase cannot start before the previous phase finishes successfully.D. Each project phase is independent from other phases to maintain adaptiveness and continual improvement.Answer: AQUESTION 502Drag and Drop QuestionDrag and drop the features of Cisco ASA with Firepower from the left onto the benefits on the right. Answer: QUESTION 503Which two authentication protocols are supported by the Cisco WSA? (Choose two.)A. WCCPB. NTLMC. TLSD. SSLE. LDAPAnswer: BEQUESTION 504When a Cisco Secure Web Appliance checks a web request, what occurs if it is unable to match a user-defined policy?A. It blocks the request.B. It applies the global policy.C. It applies the next identification profile policy.D. It applies the advanced policy.Answer: BExplanation:Policy OrderThe order in which policies are listed in a policy table determines the priority with which they are applied to Web requests. Web requests are checked against policies beginning at the top of the table and ending at the first policy matched. Any policies below that point in the table are not processed.If no user-defined policy is matched against a Web request, then the global policy for that policy type is applied. Global policies are always positioned last in Policy tables and cannot be re-ordered.QUESTION 505Which Cisco solution extends network visibility, threat detection, and analytics to public cloud environments?A. Cisco UmbrellaB. Cisco Stealthwatch CloudC. Cisco AppdynamicsD. Cisco CloudLockAnswer: BExplanation:https://blogs.cisco.com/security/agentless-threat-detection-for-microsoft-azure-workloads-with-cisco-stealthwatch-cloudQUESTION 506Which metric is used by the monitoring agent to collect and output packet loss and jitter information?A. WSAv performanceB. AVC performanceC. OTCP performanceD. RTP performanceAnswer: DExplanation:https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/avc/guide/avc-user-guide/avc_tech_overview.htmlQUESTION 507Which two criteria must a certificate meet before the Cisco Secure Web Appliance uses it to decrypt application traffic? (Choose two.)A. It must include the current date.B. It must reside in the trusted store of the Secure Web Appliance.C. It must reside in the trusted store of the endpoint.D. It must have been signed by an internal CA.E. it must contain a SAN.Answer: BCExplanation:It must reside in the trusted store of the endpoint: The certificate used by the Secure Web Appliance for HTTPS decryption must be trusted by the client devices (endpoints). This ensures that the endpoints recognize the appliance as a trusted intermediary and do not display certificate warnings.It must reside in the trusted store of the Secure Web Appliance: The appliance itself must have access to the certificate, including the private key, in its trusted certificate store to use it for decrypting and re-encrypting traffic.QUESTION 508What are two benefits of using Cisco Duo as an MFA solution? (Choose two.)A. grants administrators a way to remotely wipe a lost or stolen deviceB. provides simple and streamlined login experience for multiple applications and usersC. native integration that helps secure applications across multiple cloud platforms or on-premises environmentsD. encrypts data that is stored on endpointsE. allows for centralized management of endpoint device applications and configurationsAnswer: BCQUESTION 509How does Cisco Workload Optimization portion of the network do EPP solutions solely performance issues?A. It deploys an AWS Lambda systemB. It automates resource resizingC. It optimizes a flow pathD. It sets up a workload forensic scoreAnswer: BQUESTION 510What are two benefits of using an MDM solution? (Choose two.)A. grants administrators a way to remotely wipe a lost or stolen deviceB. provides simple and streamlined login experience for multiple applications and usersC. native integration that helps secure applications across multiple cloud platforms or on-premises environmentsD. encrypts data that is stored on endpointsE. allows for centralized management of endpoint device applications and configurationsAnswer: AEQUESTION 511A company has 5000 Windows users on its campus. Which two precautions should IT take to prevent WannaCry ransomware from spreading to all clients? (Choose two.)A. Segment different departments to different IP blocks and enable Dynamic ARp inspection on all VLANsB. Ensure that noncompliant endpoints are segmented off to contain any potential damage.C. Ensure that a user cannot enter the network of another department.D. Perform a posture check to allow only network access to (hose Windows devices that are already patched.E. Put all company users in the trusted segment of NGFW and put all servers to the DMZ segment of the Cisco NGFW.Answer: BDQUESTION 512What provides total management for mobile and PC including managing inventory and device tracking, remote view, and live troubleshooting using the included native remote desktop support?A. mobile device managementB. mobile content managementC. mobile application managementD. mobile access managementAnswer: AQUESTION 513What is the process In DevSecOps where all changes In the central code repository are merged and synchronized?A. CDB. EPC. CID. QAAnswer: CExplanation:Continuous integration (CI) is the process of automating and integrating code changes and updates from many team members during software development. In CI, automated tools confirm that software code is valid and error-free before it's integrated, which helps detect bugs and speed up new releases.https://www.cisco.com/c/en/us/solutions/data-center/data-center-networking/what-is-ci-cd.html#~ci-cd-explainedQUESTION 514Based on the NIST 800-145 guide, which cloud architecture may be owned, managed, and operated by one or more of the organizations in the community, a third party, or some combination of them, and it may exist on or off premises?A. hybrid cloudB. private cloudC. public cloudD. community cloudAnswer: DQUESTION 515Which type of data does the Cisco Stealthwatch system collect and analyze from routers, switches, and firewalls?A. NTPB. syslogC. SNMPD. NetFlowAnswer: DResources From:1.2025 Latest Braindump2go 350-701 Exam Dumps (PDF & VCE) Free Share:https://www.braindump2go.com/350-701.html2.2025 Latest Braindump2go 350-701 PDF and 350-701 VCE Dumps Free Share:https://drive.google.com/drive/folders/1Fz2rtzfDdCvomlIPqv3RZzNAkMIepErv?usp=sharing3.2025 Free Braindump2go 350-701 Exam Questions Download:https://www.braindump2go.com/free-online-pdf/350-701-VCE-Dumps(431-515).pdfFree Resources from Braindump2go,We Devoted to Helping You 100% Pass All Exams! --------------------------------------------------- Images: --------------------------------------------------- --------------------------------------------------- Post date: 2025-12-23 06:23:51 Post date GMT: 2025-12-23 06:23:51 Post modified date: 2025-12-23 06:23:51 Post modified date GMT: 2025-12-23 06:23:51 ____________________________________________________________________________________________ Export of Post and Page as text file has been powered by [ Universal Post Manager ] plugin from www.gconverters.com